If you want to secure the network of your D-Link wireless range extender, start by hiding its network name (SSID). Wondering how to do that? If yes, walk through the guidelines mentioned in this post.
But, before you do that, take care of the following things:
- Your D-Link extender should be placed in close proximity to the router.
- Your extender or router should not be placed near cordless phones, washing machines, baby monitors, Bluetooth speakers, mirrors, fish tanks, refrigerators, microwave ovens, treadmills, televisions, corners, Bluetooth speakers, and walls.
- Make sure that you have properly performed D Link WiFi extender setup.
How to Change D-Link Extender Network Name?
Follow the instructions mentioned below and learn how to change the SSID of your D-Link wireless range extender:
- Plug your D-Link extender into a wall socket and turn it on.
- Once the power LED has turned solid green, connect your extender to your home router.
- You can use a wired or wireless source to connect your devices. The choice is yours.
- Thereafter, switch on your computer or laptop.
- Open a web browser. Make sure that it is running on its updated version.
- Enter dlinkap.local in the address bar of the web browser and press Enter.
- You will get welcomed by the D-Link extender login page.
- When prompted, fill in the default username and password.
- Click Log In.
- Once logged in, move the cursor to Settings.
- Click Extended WiFi from the drop-down menu.
- Under the WiFi Name (SSID) field, enter the new network name you want your device to have.
- You can do this thing separately for both the 2.4 GHz and 5 GHz bands.
- Click Save.
- In some time, the changes that you have made will become effective.
Note: You can also change the network name of your D-Link router by following these steps. If you come across the dlinkrouter.local not working issue while doing so, update the firmware of your device to the latest version.
And with that, you have completed the process of changing the network name (SSID) of your D-Link wireless range extender. On the off chance, you are not able to, follow the hacks mentioned below.
Can’t Change D-Link Extender SSID?
- Make sure that your D-Link extender is receiving an adequate power supply from the wall outlet. If the wall socket you are currently using is damaged, plug your extender into a different one.
- If you have decided to use an Ethernet cable to connect your D-Link extender and the existing router, ensure that it is not worn out or damaged from anywhere. In case it is, consider replacing it with a new one.
- Clear the cache, cookies, and browsing history of the web browser you are using to log in to your D-Link wireless range extender.
- Do not enter the default web address in the search bar of the web browser. Instead type it in the address bar. Also, cross it before pressing the Enter key.
- In case the default web address does not work for you, you can use the default IP address to access the D-Link extender login page.
- The firmware of your D-Link wireless range extender should be running on its updated version. If you are not sure about the process, refer to the user manual.
- Ensure that you have entered the correct username and password when required.
- Do not switch off your D-Link WiFi extender while you are busy changing its network name (SSID).
Once you are done following these troubleshooting tips, try to change the network name of your D-Link wireless range extender. Any luck?
This was all about how you can change the network name (SSID) of your D-Link wireless range extender. Now, no hacker or unauthorized user will be able to access the network of your WiFi device and steal your personal information without your consent. Your network is all safe now.
If you liked reading this article, do share your feedback via the comment section. Surely that might boost the confidence of your fellow readers in resolving the same issue.