Are you facing an issue while connecting to SSID (WiFi network name) of your WavLink extender? Unable to do WavLink AC1200 setup or log in to the extender using wifi wavlink com? Yes? Wipe out that sweat from your forehead! A hundred users are daily reporting the same issue as they are not able to join WiFi network of their WavLink extender. Therefore, to get the issue fixed, here we have provided a number of basic troubleshooting tips to resolve the issue in discussion with ease. So, let’s begin without wasting any time.
WavLink AC1200 extender is just taken for an example here.
Can’t Join SSID of WavLink Extender [Fixed]
By implementing the fixes highlighted below, you will have access to the extender’s SSID in minutes.
Power Cycle Your WavLink WiFi Extender
Giving a fresh start to your WavLink WiFi extender that can be fruitful in resolving the problem you are facing “can’t join WiFi network of the Wavlink extender”. However, many users aren’t aware of the proper process to power cycle their Wavlink extender. If you are also sailing in the same boat, then we have a rescue plan for you. Just walk through the below-mentioned steps and know how to reboot your Wavlink WiFi extender with ease.
- First of all, you need to turn the extender off and unplug it from its respective power source.
- Wait for 4-5 before plugging it to the power source.
- Plug it back in again, turn it on.
Now, try to join the SSID (WiFi network name) of your Wavlink WiFi extender. If you are still experiencing the same issue, don’t scroll away. Instead jump to the next troubleshooting tip.
Verify the WiFi Password
Now, you need to ensure that you are entering the correct WiFi password while trying to join the SSID of Wavlink range extender. 4 out of 5 users, at times, input incorrect password resulting in failure to join the SSID of the extender. So, in order to join the SSID or your WavLink device, you need to be careful while typing the password in the required field and also cross-check the entrée before hitting Connect.
Check the Connected Network
If there’s nothing wrong with the password entrée and still you aren’t able to connect with the WiFi network of your WavLink extender, then you need to check the network you are joining. Why? There are chances that you are trying to join an incorrect WiFi network. It usually happens when your two different WiFi networks with the same name. Hence, be very careful while connecting to the WiFi network of your WavLink extender.
Set a unique network name for your WavLink extender. Why? As it will be easy for you to identify its (WavLink’s) SSID from the network list. Also, make it visible! make be it is hidden due to which you are unable to join it.
Have a Look at Your Internet Connection
No luck? Yes? Check your internet connection now and confirm if it is working fine or not. Always remember, a weak or poor internet connection is also one of the major reasons why you aren’t able to join the SSID of your WavLink extender. Therefore, you need to contact your ISP ensuring everything is fine from this end. Just in case, you find that poor internet connectivity issue persists from his end, ask him to get it resolved immediately.
Still the Same? Try this!
Check the Ethernet cable you are using to make a wired connection between your WavLink extender and your host router. On the off chance, you find any damage in the cable, replace it with the new one right away. In case of wireless connection, ensure that your WavLink extender is receiving proper WiFi signals from your router. If that’s not the case, then try relocating it to another area close to your router to avoid any WiFi signal interference issue.
Reset Your WavLink WiFi Extender
If none of the above troubleshooting tips works for you and you still aren’t able to join the SSID of your WavLink WiFi extender, then, you need to reset it to the default factory settings and re-configure it again. Trust us, it will fix all the minor or major issues that prevent you from accessing the WavLink extender’s SSID.
To reset the extender:
- Look for the reset button on your WavLink device.
- Once you have located the extender’s reset button, press it gently using a paper clip.
- Do not use pin, oil pin, or any similar object for pressing the reset button.
- Release the extender’s reset button. Until you are done with this step, your WavLink device will be reset.
Now, re-configure it using wifi wavlink com web address the default login credentials.
After configuring the extender from scratch, you will have new extended SSID. Connect with it using the password and start enjoying the super-fast WiFi range from any corner of your house.