Tech Guide to Fix Linksys Extender Not Connecting to Internet

Guide to Fix Linksys Extender Not Connecting to Internet

-

- Advertisment -

Linksys WiFi range extenders have become famous due to their top-notch performance. A number of people have started investing in Linksys range extender to boost current WiFi coverage in their homes. However, users have been reporting that they are facing a hard time while performing the Linksys range extender setup in their homes just because it is getting connected to the internet. Are you experiencing a similar issue?

Well, fret not. We are here for your assistance. In this guide, we have highlighted the topmost troubleshooting hacks that can help you to fix the Linksys WiFi range extender internet issue. Read on.

Troubleshooting Linksys Extender Not Connecting to Internet

  1. Restart the Linksys Extender

This is the very first step that you should follow every time you get stuck because of a technical issue with your device. Now that the Linksys extender is not connecting to the internet, we would like to suggest you same thing.

Once you are done rebooting your extender, check if it is getting connected to the internet. In case, the issue is still clinging on to you, then waste no more time and get to the next troubleshooting hack.

  1. Bring the WiFi Devices Closer

Another thing that might have led to the Linksys wireless range extender internet connectivity issue is the distance between the networking devices. Thus, pull the Linksys extender and the host router a little closer to each other. Here, make sure that the devices should not be too close either because too less distance between these devices can further lead to signal interference enhancing the Linksys extender internet issue. Hence, maintain an appropriate distance between the devices. Once done, use extender.linksys.com or the IP address to check if the internet connectivity issue has been resolved or not.

  1. Double-Check Ethernet Connection

The Ethernet cable put to use to connect the Linksys range extender and the router should be damage-free. Perhaps this is what is causing the issue.

Therefore, if you find a fault in the Ethernet cable, we recommend that you replace the existing cable with a new one. Make sure that the connection between them is finger-tight and not loose. Has the issue been fixed? Move further to the next hack if the issue persists.

  1. Kick Out Signal Interference

Some smart home appliances like Bluetooth speakers, treadmills, cordless phones, washing, baby monitors, refrigerators, smart TVs, microwave ovens, etc. have the capability to mess with the signals of the Linksys range extender by causing signal interference.

This is yet another reason behind the Linksys extender internet issue. To do away with this, change the location of your wireless extender. While doing so, do make sure that your device is not placed in corners, attics, basements or behind furniture.

  1. Factory Reset Linksys Range Extender

If none of the above-given troubleshooting hacks have helped you to get the Linksys extender internet issue fixed, you need to perform a factory default reset immediately.

Right after you have reset the Linksys WiFi extender set it up from scratch. In case you do not know how to setup Linksys extender, here are the steps:

  • Turn on the power supply to the Linksys extender.
  • Fetching an Ethernet cable, connect the extender to the router.
  • Now, visit extender.linksys.com on a web browser. You can also use the default IP address in this step.
  • Log in to your Linksys account using the Linksys credentials.
  • Once you are on the Linksys admin dashboard, follow the on-screen prompts and get through the setup process.

The Bottom Line

With the hopes of helping you out, we are putting a full stop to this guide written on fixing the Linksys wireless range extender internet connectivity issue. As soon as the issue gets fixed, do mention it in the comment section below and let us know which troubleshooting hack worked for you. We would like to recommend getting the firmware updated to the latest version to avoid confronting issues with your Linksys WiFi range extender. By updating the firmware, the overall performance of the device gets improved and also there is an enhancement in the security.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest news

Learn Everything About WiFi Security of Netgear Extender

When an individual installs a Netgear extender in the house, the only thing he’s excited about is a blazing-fast...

How to secure a Netgear Router and Home Network after a hack

It will be a very glad moment for those who buy a new device like a Netgear router and...

What to Do When You Can’t Access Orbi Login Page?

So, you own a Netgear Orbi and are very happy with its performance. It’s so good to know that...

Netgear Router Not Connecting to Device? Let’s Fix It!

As soon as you are done performing Netgear router setup via Netgear Nighthawk router login page, you can access...
- Advertisement -

How Can You Log in to Your Netgear Router?

In today's technology-driven world, the internet plays a big role in everything from business to education. So, many people...

Why My Netgear Extender Not Accepting Password?

I want to access the Netgear Genie setup page but somehow the login password is not working. I remember...

Must read

Learn Everything About WiFi Security of Netgear Extender

When an individual installs a Netgear extender in the...

How to secure a Netgear Router and Home Network after a hack

It will be a very glad moment for those...
- Advertisement -

You might also likeRELATED
Recommended to you