Investing in a Linksys range extender to avoid hard-to-access WiFi zones in the home is the wisest choice. You can access the Linksys extender login page and get it up and working by setting it up with the existing home network. But what if you see ablinking orange light on the extender? What was that? Is your Linksys extender blinking orange light? Are you seeking the appropriate information regarding the reason for the orange light’s blinking and the steps required to eliminate it? You’ve come to the right post, then. This guide is jam-packed with answers to all of your Why and How inquiries going on in your mind right now. Therefore, keep reading.
What Does the Linksys Extender’s Orange LED Mean?
Usually, the Linksys range extender’s LED is green. This indicates that the device is in perfect working order. However, a weaker connection with the host router is indicated by a solid orange LED. Bringing the extender closer to the router accomplishes the job to handle such a situation. However, the following scenarios hold true for a blinking orange LED:
• A blinking orange light indicates that an already configured Linksys range extender is not connected to the host router.
• In another situation, when the Linksys range extender is ready for configuration from its factory settings is indicated by the blinking orange light.
In this article you will find in detail information about the reasons for the Linksys range extender’s blinking orange LED and possible solutions for fixing it.
Why is the LED blinking orange?
The Linksys WiFi range extender’s orange light frequently blinks for the following reasons:
Firmware is the software that helps a device do its basic functions. It is recommended that the Linksys range extender’s firmware be kept up to date to ensure its optimal performance. Do you recall when the firmware on your Linksys device was last updated? If you haven’t updated the firmware recently, then this could be the problem. Another possibility is that the firmware may have been corrupted if it has been updated. The device’s orange light can also be caused by corrupted firmware.
The Linksys range extender will also have a blinking orange light if it is receiving a shaky internet signal.
Orange LED blinking on the Linksys Extender: Fixed
Let’s get started on fixing the problem with your Linksys range extender right now.
The general troubleshooting tips listed below will assist you in getting rid of the blinking orange light.
Fix Unstable Internet Signal
Verify that the Linksys range extender is receiving a high-speed internet signal from the host router. If you have a Linksys router, then access the Linksys router login page to see if it is set up correctly. Once this is made sure, check the following points to ensure secure connection between the router and extender:
- A reliable internet connection should be available to the host router. Contact your ISP in the event of a problem.
- The host router network should be within range of the Linksys range extender. Bring the gadgets closer if necessary.
- Check the Ethernet cable for damage if there is a wired connection between the router and the extender. If you find that it is damaged or worn out, you should replace it right away.
- The Ethernet cable needs to be firmly inserted into the router’s and extender’s respective ports.
- The extender’s signal may be disrupted by radio waves if it is placed too close to any radio-emitting appliances or devices. Walkie-talkies, Bluetooth speakers, microwave ovens, baby monitors, and others are a few instances.
- Last but not least, don’t put the extender in a tight spot or in a corner of your home.
Move on to the next hack if these steps have not solved the problem.
Update the Firmware
If the firmware has not been updated recently, you should think about upgrading your extender to the most recent version of firmware. However, if the firmware is corrupt, you should first perform the Linksys range extender reset and then set it up again before upgrading the firmware.
You can update your Linksys range extender in the following manner:
- Download the most recent variant of firmware for your Linksys extender model and save it on your PC.
- Now, power up the Linksys range extender.
- Now you need to sign in by visiting extender.linksys.com in a web browser.
- Enter the admin password and username in the respective fields.
- On reaching the management console, select the Firmware Upgrade option from the Administration menu.
- You will be taken to a page where you can select the downloaded firmware file as soon as you click Choose File.
- Click Open after selecting the file that you have already downloaded to your computer.
- Now, click Start Upgrade now.
The firmware update process will begin. Now the most recent firmware version is running on your Linksys range extender.
The Final Note
This concludes our article on how to fix your Linksys range extender’s blinking orange light. We hope that the problem with your Linksys extender’s orange light blinking has now been resolved.