Every Netgear wireless range extender has different LED lights located on it. Surely your extender has LED lights located on it as well. Each of them has a meaning. But, in case one of the LEDs is blinking red instead of green despite you achieving mywifiext setup success, then it is a cause of worry. But, fret not. The reason being, we can help you out. Below, some troubleshooting hacks have been mentioned in this article that will be of assistance to you. So, quit stalling around and get down to reading immediately.
[Fixed] Netgear Extender Red Light Issue
1. Restart the Netgear Extender
The most basic and easiest thing that can be done from your end to stop the LED on your Netgear extender from blinking red is to restart the networking device. It has worked for many users out there. Chances are that it might help you out too.
The following steps will help you to restart your Netgear device:
- Turn off your Netgear extender.
- Hold on for some time.
- Switch on the device.
Now, check if the LED on your Netgear extender has stopped blinking red. In case it has not, then following the 2nd troubleshooting hack is recommended.
2. Replace the Ethernet Cable
Another thing that could have forced you to experience the Netgear extender red light issue is an unstable Ethernet connection. This could have happened because the Ethernet cable that is holding the connection between the networking devices in place is damaged.
To take care of the problem, it is recommended that you replace the Ethernet cable. Make sure that the new cable does not have the condition of the old one. Also, it should be connecting the devices, as in, the Netgear extender and the host router tightly. Or else, no matter what you do, you will not able to troubleshoot the Netgear extender red light issue.
Although you will be able to get the green signal after following this hack, on the off chance, you are still not able to; it is recommended that you connect the devices with the help of a wireless source of connection.
3. Avoid WiFi Interference
Bluetooth speakers, cordless phones, washing machines, baby monitors, and refrigerators are all examples of smart home appliances that are very much capable of interfering with the signals of your Netgear wireless range extender.
Blockage of WiFi signals causes issues like the one that you are currently facing. Taking this into consideration, it is recommended that you keep WiFi interference at bay. That can be done if you relocate your Netgear wireless range extender.
As soon as that happens, check again if the Netgear extender red light issue has stopped affecting your internet-usage experience. In case, it has not, then it is recommended that you do not stop reading this article yet.
4. Update the Extender Firmware
Performing Netgear extender firmware update is one of the best ways to get rid of technical issues. Thus, if you have not updated your extender’s firmware from quite some time, then it is recommended that you do so now using the Netgear extender login credentials.
Now, you might be wondering how the firmware of your Netgear extender can be updated. Well, know that you need to refer to the instructions mentioned in the user manual for this. Starting from how to update the firmware of your Netgear extender to how to restore the device to its factory default settings, you will find every process in the manual.
5. Reconfigure the Netgear Extender
Did none of the aforementioned troubleshooting hacks help you to resolve the Netgear extender red light issue? Well then, you should not waste even a single minute more to reinstall your Netgear wireless range extender.
For your information, you can use three different methods to set up your Netgear extender. The first method requires you to press the WPS button, the second requires you to access the web user interface, and the third needs you to use the Nighthawk application.
Conclusion
This was all about the efforts that one can make in order to troubleshoot the Netgear extender red light issue. We are hoping from the bottom of our hearts that you will be able to convert the red light to green within minutes after following the troubleshooting hacks mentioned in this post.
In case you do, then it is recommended that you leave a word of appreciation in the comment section for your fellow readers to read. They will surely like to know all about your experience in fixing the red light issue.
